[Scons-users] Error when passing from python 3.5.4 to python 3.6

Pierre-Luc Boily pierreluc.boily at gmail.com
Thu Jul 23 18:00:03 EDT 2020 

You can retry, the link was private.  It is a little bit bigger than just a
.ui file :(  I can rework around if you tell me it is necessary...

Le jeu. 23 juill. 2020, à 17 h 25, Bill Deegan <bill at baddogconsulting.com>
a écrit :

> The link to the github repo in your email gives me page not found on
> github.
> Typo?
>
> You should be able to make this example
> With a SConstruct and a tiny .ui file I'd think.
>
> On Thu, Jul 23, 2020 at 1:06 PM Pierre-Luc Boily <
> pierreluc.boily at gmail.com> wrote:
>
>> I tried to make it as small as possible :
>> https://github.com/peterphonic/scons_qt_example.  It might not be as
>> tiny as you asked, but I hope small enough.
>>
>> In this example, scons tries to compile uic_ASREngineWidget.cc, but this
>> file is not generated because it is not part of the QT_UICCOM tool chain.
>> SO, scons complain that the file doesn't exist (which is what I am trying
>> to do!)
>>
>> At the end, what i'd like to to, is to generate the file
>> ui_ASREngineWidget.h only.  This is what we were doing with the qt4 and qt5
>> tools...
>>
>> You will need a qt 5 folder.  I shared mine with you from one drive :
>> https://adacelcanada-my.sharepoint.com/:u:/g/personal/pboily_adacel_com/EQcBYZhknBhNqnhV3-dVNRABgF3S3JzjmOhAUEaKIqb3dQ?e=Cfigdy
>>
>> Le jeu. 23 juill. 2020, à 15 h 02, Pierre-Luc Boily <
>> pierreluc.boily at gmail.com> a écrit :
>>
>>> Could you point me out the link please?  On the issues page?
>>> https://github.com/SCons/scons/issues  ?
>>>
>>> Le jeu. 23 juill. 2020, à 14 h 30, Bill Deegan <
>>> bill at baddogconsulting.com> a écrit :
>>>
>>>> Can you push up a TINY example to github so we can try running it?
>>>>
>>>> On Thu, Jul 23, 2020 at 11:18 AM Pierre-Luc Boily <
>>>> pierreluc.boily at gmail.com> wrote:
>>>>
>>>>> I progressed a bit,
>>>>>
>>>>> If I do this :
>>>>>
>>>>> env['QT_UICCOM'] = [['$QT_UIC', '$QT_UICDECLFLAGS', '-o',
>>>>> '${TARGETS[0]}', '$SOURCE']]
>>>>>
>>>>> It works a little bit better, the action is not truncated anymore.
>>>>>
>>>>> But somehow, somewhere, scons still have the original tool chain with
>>>>> 3 actions.  See traces below :
>>>>>
>>>>> scons: Reading SConscript files ...
>>>>> scons: done reading SConscript files.
>>>>> scons: Building targets ...
>>>>> Building build\sr\speech\ASREngineSpawner\ui_ASREngineWidget.h with
>>>>> action:
>>>>>   UnlinkFunc(target, source, env)
>>>>> Building build\sr\speech\ASREngineSpawner\ui_ASREngineWidget.h and
>>>>> build\sr\speech\ASREngineSpawner\uic_ASREngineWidget.cc and
>>>>> build\sr\speech\ASREngineSpawner\moc_ASREngineWidget.cc with action:
>>>>>   $QT_UIC $QT_UICDECLFLAGS -o ${TARGETS[0]} $SOURCE
>>>>> C:\svn\3rdParty\3rdPartyPackages\Qt-5.12.1_vs2017\5.12.1\msvc2017\bin\uic
>>>>> -o build\sr\speech\ASREngineSpawner\ui_ASREngineWidget.h
>>>>> sr\speech\ASREngineSpawner\ASREngineWidget.ui
>>>>> scons:
>>>>> `build\sr\speech\ASREngineSpawner\MSVC14.1\x86\release\ASREngineSpawner.obj'
>>>>> is up to date.
>>>>> scons: done building targets.
>>>>>
>>>>> Even if  ui_ASREngineWidget.h has been generated, the next build is
>>>>> not up to date, because scons tries to generate  uic_ASREngineWidget.cc,
>>>>> even if the generation of this file has been removed from  QT_UICCOM.
>>>>>
>>>>> Le jeu. 23 juill. 2020, à 08 h 52, Pierre-Luc Boily <
>>>>> pierreluc.boily at gmail.com> a écrit :
>>>>>
>>>>>> scons: Reading SConscript files ...
>>>>>> scons: done reading SConscript files.
>>>>>> scons: Building targets ...
>>>>>> Building build\sr\speech\ASREngineSpawner\ASREngineWidget.h and
>>>>>> build\sr\speech\ASREngineSpawner\uic_ASREngineWidget.cc and
>>>>>> build\sr\speech\ASREngineSpawner\moc_ASREngineWidget.cc with action:
>>>>>>   $QT_BINPATH\uic
>>>>>>
>>>>>> C:\svn\3rdParty\3rdPartyPackages\Qt-5.12.1_vs2017\5.12.1\msvc2017\bin\uic
>>>>>>
>>>>>> What I am trying to do (override QT_UICCOM ) by doing this :
>>>>>>
>>>>>> env['QT_UICCOM'] = env['QT_UICCOM'][0]
>>>>>>
>>>>>> is clearly not working
>>>>>>
>>>>>>
>>>>>> Le mer. 22 juill. 2020, à 21 h 06, Bill Deegan <
>>>>>> bill at baddogconsulting.com> a écrit :
>>>>>>
>>>>>>> run with --debug=presub and paste
>>>>>>>
>>>>>>> On Wed, Jul 22, 2020 at 9:48 AM Pierre-Luc Boily <
>>>>>>> pierreluc.boily at gmail.com> wrote:
>>>>>>>
>>>>>>>> Not the first time and I guess not the last, but I think I don't
>>>>>>>> see something that should be easy.  From  QT_UICCOM, I only need the first
>>>>>>>> action.  So, what I try to do is to override  QT_UICCOM with  QT_UICCOM[0],
>>>>>>>> but this is not working, the uic action is truncated.
>>>>>>>>
>>>>>>>> If you look at the trace below,   The result of the print of
>>>>>>>> QT_UICCOM[0]  is not the same as if I print the whole  QT_UICCOM list. I
>>>>>>>> mean,  QT_UICCOM  contains commas between arguments.   QT_UICCOM[0]
>>>>>>>> arguments are not separated by command.  I am suspecting it could be my
>>>>>>>> problem.
>>>>>>>>
>>>>>>>> Traces:
>>>>>>>> -------------------------------
>>>>>>>> scons: Reading SConscript files ...
>>>>>>>>
>>>>>>>> [['$QT_UIC', '$QT_UICDECLFLAGS', '-o', '${TARGETS[0]}', '$SOURCE'],
>>>>>>>> ['$QT_UIC', '$QT_UICIMPLFLAGS', '-impl', '${TARGETS[0].file}', '-o',
>>>>>>>> '${TARGETS[1]}', '$SOURCE'], ['$QT_MOC', '$QT_MOCFROMHFLAGS', '-o',
>>>>>>>> '${TARGETS[2]}', '${TARGETS[0]}']]
>>>>>>>>
>>>>>>>> $QT_UIC $QT_UICDECLFLAGS -o ${TARGETS[0]} $SOURCE
>>>>>>>>
>>>>>>>> scons: done reading SConscript files.
>>>>>>>> scons: Building targets ...
>>>>>>>> C:\svn\3rdParty\3rdPartyPackages\Qt-5.12.1_vs2017\5.12.1\msvc2017\bin\uic
>>>>>>>> UIC_ARG_IS_MISSING_HERE
>>>>>>>> ---------------------------------
>>>>>>>>
>>>>>>>>
>>>>>>>> Code :
>>>>>>>>
>>>>>>>> print('')
>>>>>>>> print(env['QT_UICCOM'])
>>>>>>>> print('')
>>>>>>>> print(env['QT_UICCOM'][0])
>>>>>>>> print('')
>>>>>>>>
>>>>>>>> env['QT_UICCOM'] = env['QT_UICCOM'][0]
>>>>>>>>
>>>>>>>> lib_tgt = env.Library(target='lib',
>>>>>>>>                       source=['ASREngineSpawner.cpp', 'ProcessManager.cpp', 'ASREngineWidget.ui'])
>>>>>>>>
>>>>>>>>
>>>>>>>> Le mar. 21 juill. 2020, à 19 h 34, Bill Deegan <
>>>>>>>> bill at baddogconsulting.com> a écrit :
>>>>>>>>
>>>>>>>>> Yes.
>>>>>>>>> Change it in your Environment() in your SConstruct/SConscripts..
>>>>>>>>>
>>>>>>>>> On Tue, Jul 21, 2020 at 1:16 PM Pierre-Luc Boily <
>>>>>>>>> pierreluc.boily at gmail.com> wrote:
>>>>>>>>>
>>>>>>>>>> The problem is still there with scons 4.0.1, but I decided to use
>>>>>>>>>> qt tool that ships with scons.  I was not even aware of this, we were using
>>>>>>>>>> the external tool since forever....
>>>>>>>>>>
>>>>>>>>>> But I still do have a weird problem.  It looks like scons Uic
>>>>>>>>>> does something that I don't need, the -impl option.  It looks like it is
>>>>>>>>>> not part of the Uic application that ships with my version of qt.  Is there
>>>>>>>>>> a way to remove the --impl from 'QT_UICCOM': ?
>>>>>>>>>>
>>>>>>>>>> scons: done reading SConscript files.
>>>>>>>>>> scons: Building targets ...
>>>>>>>>>> C:\svn\3rdParty\3rdPartyPackages\Qt-5.12.1_vs2017\5.12.1\msvc2017\bin\uic
>>>>>>>>>> -o build\sr\speech\ASREngineSpawner\ASREngineWidget.h
>>>>>>>>>> sr\speech\ASREngineSpawner\ASREngineWidget.ui
>>>>>>>>>> C:\svn\3rdParty\3rdPartyPackages\Qt-5.12.1_vs2017\5.12.1\msvc2017\bin\uic
>>>>>>>>>> -impl ASREngineWidget.h -o
>>>>>>>>>> build\sr\speech\ASREngineSpawner\uic_ASREngineWidget.cc
>>>>>>>>>> sr\speech\ASREngineSpawner\ASREngineWidget.ui
>>>>>>>>>> Unknown option 'impl'.
>>>>>>>>>> scons: *** [build\sr\speech\ASREngineSpawner\ASREngineWidget.h]
>>>>>>>>>> Error 1
>>>>>>>>>> scons: building terminated because of errors.
>>>>>>>>>> PS C:\SVN\products\faa_mx\integ-newScons.4.0>
>>>>>>>>>> PS C:\SVN\products\faa_mx\integ-newScons.4.0>
>>>>>>>>>> PS C:\SVN\products\faa_mx\integ-newScons.4.0>
>>>>>>>>>> PS C:\SVN\products\faa_mx\integ-newScons.4.0>
>>>>>>>>>> PS C:\SVN\products\faa_mx\integ-newScons.4.0>
>>>>>>>>>> PS C:\SVN\products\faa_mx\integ-newScons.4.0>
>>>>>>>>>> C:\svn\3rdParty\3rdPartyPackages\Qt-5.12.1_vs2017\5.12.1\msvc2017\bin\uic
>>>>>>>>>> -help
>>>>>>>>>> Usage:
>>>>>>>>>> C:\svn\3rdParty\3rdPartyPackages\Qt-5.12.1_vs2017\5.12.1\msvc2017\bin\uic.exe
>>>>>>>>>> [options] [uifile]
>>>>>>>>>> Qt User Interface Compiler version 5.12.1
>>>>>>>>>>
>>>>>>>>>> Options:
>>>>>>>>>>   -?, -h, --help                Displays this help.
>>>>>>>>>>   -v, --version                 Displays version information.
>>>>>>>>>>   -d, --dependencies            Display the dependencies.
>>>>>>>>>>   -o, --output <file>           Place the output into <file>
>>>>>>>>>>   -p, --no-protection           Disable header protection.
>>>>>>>>>>   -n, --no-implicit-includes    Disable generation of
>>>>>>>>>> #include-directives.
>>>>>>>>>>   -s, --no-stringliteral        Deprecated. The use of this
>>>>>>>>>> option won't take
>>>>>>>>>>                                 any effect.
>>>>>>>>>>   --postfix <postfix>           Postfix to add to all generated
>>>>>>>>>> classnames.
>>>>>>>>>>   --tr, --translate <function>  Use <function> for i18n.
>>>>>>>>>>   --include <include-file>      Add #include <include-file> to
>>>>>>>>>> <file>.
>>>>>>>>>>   -g, --generator <java|cpp>    Select generator.
>>>>>>>>>>   --idbased                     Use id based function for i18n
>>>>>>>>>>
>>>>>>>>>> Le lun. 20 juill. 2020, à 23 h 45, Pierre-Luc Boily <
>>>>>>>>>> pierreluc.boily at gmail.com> a écrit :
>>>>>>>>>>
>>>>>>>>>>> Thx.  Ill try with scons 4 and with the qt tool that ships with
>>>>>>>>>>> scons.  Let you know...
>>>>>>>>>>>
>>>>>>>>>>> Le lun. 20 juill. 2020, à 08 h 37, Thomas Berg <
>>>>>>>>>>> merlin66b at gmail.com> a écrit :
>>>>>>>>>>>
>>>>>>>>>>>>
>>>>>>>>>>>> On Sat, 18 Jul 2020 at 00:35, Pierre-Luc Boily <
>>>>>>>>>>>> pierreluc.boily at gmail.com> wrote:
>>>>>>>>>>>>
>>>>>>>>>>>>> I was pretty sure the problem was in qt5 tool and not in scons
>>>>>>>>>>>>> ?
>>>>>>>>>>>>>
>>>>>>>>>>>>>
>>>>>>>>>>>> That could very well be, but volunteers who devote their spare
>>>>>>>>>>>> time to help may have a policy to only start helping you when you have
>>>>>>>>>>>> upgraded to the latest version. In general it avoids wasting time on
>>>>>>>>>>>> already solved issues.
>>>>>>>>>>>>
>>>>>>>>>>>> It could be that upgrading doesn't help, but things may also
>>>>>>>>>>>> have happened in SCons that could affect this. If you still see the problem
>>>>>>>>>>>> after upgrading you'll likely get the help you need.
>>>>>>>>>>>>
>>>>>>>>>>>>
>>>>>>>>>>>>
>>>>>>>>>>>>> File
>>>>>>>>>>>>> "C:\SVN\3rdParty\devTool\site_scons\site_tools\qt5_init.py", line 373:
>>>>>>>>>>>>> cpp, cpp_contents, out_sources)
>>>>>>>>>>>>> File
>>>>>>>>>>>>> "C:\SVN\3rdParty\devTool\site_scons\site_tools\qt5_init.py", line 229:
>>>>>>>>>>>>> if cpp and re.search(inc_moc_cpp, cpp_contents, re.M):
>>>>>>>>>>>>> File "C:\Python\Python3.6.8\lib\re.py", line 182:
>>>>>>>>>>>>>
>>>>>>>>>>>>>
>>>>>>>>>>>> Regarding the error, it's similar to an issue I saw myself when
>>>>>>>>>>>> switching to python 3. SCons has two ways to get the content of a file, one
>>>>>>>>>>>> returns text (python unicode), and the other returns bytes. If that's the
>>>>>>>>>>>> problem, swapping out calls to get_contents() with get_text_contents()
>>>>>>>>>>>> might help in the tool source code.
>>>>>>>>>>>>
>>>>>>>>>>>> I see you are using an external qt tool instead of the one that
>>>>>>>>>>>> ships with scons. I think the qt tool that ships with scons supports Qt5
>>>>>>>>>>>> now, so you could consider trying it instead of this possibly unmaintained
>>>>>>>>>>>> tool.
>>>>>>>>>>>>
>>>>>>>>>>>> Cheers,
>>>>>>>>>>>> Thomas
>>>>>>>>>>>>
>>>>>>>>>>>>
>>>>>>>>>>>> On Sat, 18 Jul 2020 at 00:35, Pierre-Luc Boily <
>>>>>>>>>>>> pierreluc.boily at gmail.com> wrote:
>>>>>>>>>>>>
>>>>>>>>>>>>> I was pretty sure the problem was in qt5 tool and not in scons
>>>>>>>>>>>>> ?
>>>>>>>>>>>>>
>>>>>>>>>>>>> File
>>>>>>>>>>>>> "C:\SVN\3rdParty\devTool\site_scons\site_tools\qt5_init.py", line 373:
>>>>>>>>>>>>> cpp, cpp_contents, out_sources)
>>>>>>>>>>>>> File
>>>>>>>>>>>>> "C:\SVN\3rdParty\devTool\site_scons\site_tools\qt5_init.py", line 229:
>>>>>>>>>>>>> if cpp and re.search(inc_moc_cpp, cpp_contents, re.M):
>>>>>>>>>>>>> File "C:\Python\Python3.6.8\lib\re.py", line 182:
>>>>>>>>>>>>>
>>>>>>>>>>>>> Le ven. 17 juill. 2020, à 15 h 48, Bill Deegan <
>>>>>>>>>>>>> bill at baddogconsulting.com> a écrit :
>>>>>>>>>>>>>
>>>>>>>>>>>>>> Please update your SCons version to 4.0.1 and retry.
>>>>>>>>>>>>>> Note if you've installed scons via pip, you  should pip
>>>>>>>>>>>>>> uninstall scons, and then pip install scons as there's a windows specific
>>>>>>>>>>>>>> pip+scons issue.
>>>>>>>>>>>>>>
>>>>>>>>>>>>>> On Fri, Jul 17, 2020 at 9:09 AM Pierre-Luc Boily <
>>>>>>>>>>>>>> pierreluc.boily at gmail.com> wrote:
>>>>>>>>>>>>>>
>>>>>>>>>>>>>>> Hello,
>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>> Sorry to post this here, this is not direclty linked to
>>>>>>>>>>>>>>> scons, but to qt5
>>>>>>>>>>>>>>> tools.  I thought that maybe someone faced this problem
>>>>>>>>>>>>>>> before in the scons
>>>>>>>>>>>>>>> code.
>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>> https://bitbucket.org/dirkbaechle/scons_qt5/issues/14/from-python-354-to-368-raise-sourceerror
>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>> python : 3.6.8
>>>>>>>>>>>>>>> scons : 3.0.5
>>>>>>>>>>>>>>> os : windows 10
>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>> Trying to update my python from 3.5.4 to 3.6.8 version and I
>>>>>>>>>>>>>>> stumbled on the
>>>>>>>>>>>>>>> exception below. I found something similar to this page :
>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>> https://stackoverflow.com/questions/58328587/python-3-7-4-re-error-bad-escape-s-at-position-0
>>>>>>>>>>>>>>> .
>>>>>>>>>>>>>>> but I don`t understand... :
>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>> PS C:\SVN\products\faa_mx\integ> scons -n
>>>>>>>>>>>>>>> scons: Reading SConscript files ...
>>>>>>>>>>>>>>> error: bad escape \m at position 37:
>>>>>>>>>>>>>>> File "C:\SVN\products\faa_mx\integ\SConstruct", line 30:
>>>>>>>>>>>>>>> sc_manager.build()
>>>>>>>>>>>>>>> File
>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>> "C:\SVN\products\faa_mx\integ\cm\env\scons\utilities\sconscriptManager.py",
>>>>>>>>>>>>>>> line 44:
>>>>>>>>>>>>>>> duplicate=0)
>>>>>>>>>>>>>>> File
>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>> "c:\python\python3.6.8\lib\site-packages\scons\SCons\Script\SConscript.py",
>>>>>>>>>>>>>>> line 668:
>>>>>>>>>>>>>>> return method(*args, **kw)
>>>>>>>>>>>>>>> File
>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>> "c:\python\python3.6.8\lib\site-packages\scons\SCons\Script\SConscript.py",
>>>>>>>>>>>>>>> line 605:
>>>>>>>>>>>>>>> return _SConscript(self.fs, files, **subst_kw)
>>>>>>>>>>>>>>> File
>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>> "c:\python\python3.6.8\lib\site-packages\scons\SCons\Script\SConscript.py",
>>>>>>>>>>>>>>> line 286:
>>>>>>>>>>>>>>> exec(compile(scriptdata, scriptname, 'exec'),
>>>>>>>>>>>>>>> call_stack[-1].globals)
>>>>>>>>>>>>>>> File
>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>> "C:\SVN\products\faa_mx\integ\sr\speech\ASREngineSpawner\ASREngineSpawner.sc",
>>>>>>>>>>>>>>> line 12:
>>>>>>>>>>>>>>> lib_tgt = env.build_library(envService,
>>>>>>>>>>>>>>> ['ASREngineSpawner.cpp',
>>>>>>>>>>>>>>> 'ProcessManager.cpp'] + env.Glob('.ui'))
>>>>>>>>>>>>>>> File
>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>> "C:\SVN\products\faa_mx\integ\cm\env\scons\adacelBuilders\pseudoBuilders.py",
>>>>>>>>>>>>>>> line 95:
>>>>>>>>>>>>>>> source=tgt)
>>>>>>>>>>>>>>> File
>>>>>>>>>>>>>>> "c:\python\python3.6.8\lib\site-packages\scons\SCons\Environment.py",
>>>>>>>>>>>>>>> line 260:
>>>>>>>>>>>>>>> return MethodWrapper.call(self, target, source, *args, **kw)
>>>>>>>>>>>>>>> File
>>>>>>>>>>>>>>> "c:\python\python3.6.8\lib\site-packages\scons\SCons\Environment.py",
>>>>>>>>>>>>>>> line 224:
>>>>>>>>>>>>>>> return self.method(*nargs, **kwargs)
>>>>>>>>>>>>>>> File
>>>>>>>>>>>>>>> "c:\python\python3.6.8\lib\site-packages\scons\SCons\Builder.py", line
>>>>>>>>>>>>>>> 645:
>>>>>>>>>>>>>>> return self.execute(env, target, source, OverrideWarner(kw),
>>>>>>>>>>>>>>> ekw)
>>>>>>>>>>>>>>> File
>>>>>>>>>>>>>>> "c:\python\python3.6.8\lib\site-packages\scons\SCons\Builder.py", line
>>>>>>>>>>>>>>> 564:
>>>>>>>>>>>>>>> tlist, slist = self.create_nodes(env, target, source)
>>>>>>>>>>>>>>> File
>>>>>>>>>>>>>>> "c:\python\python3.6.8\lib\site-packages\scons\SCons\Builder.py", line
>>>>>>>>>>>>>>> 528:
>>>>>>>>>>>>>>> target, source = self.emitter(target=tlist, source=slist,
>>>>>>>>>>>>>>> env=env)
>>>>>>>>>>>>>>> File
>>>>>>>>>>>>>>> "c:\python\python3.6.8\lib\site-packages\scons\SCons\Builder.py", line
>>>>>>>>>>>>>>> 353:
>>>>>>>>>>>>>>> target, source = e(target, source, env)
>>>>>>>>>>>>>>> File
>>>>>>>>>>>>>>> "C:\SVN\3rdParty\devTool\site_scons\site_tools\qt5_init.py", line 373:
>>>>>>>>>>>>>>> cpp, cpp_contents, out_sources)
>>>>>>>>>>>>>>> File
>>>>>>>>>>>>>>> "C:\SVN\3rdParty\devTool\site_scons\site_tools\qt5_init.py", line 229:
>>>>>>>>>>>>>>> if cpp and re.search(inc_moc_cpp, cpp_contents, re.M):
>>>>>>>>>>>>>>> File "C:\Python\Python3.6.8\lib\re.py", line 182:
>>>>>>>>>>>>>>> return _compile(pattern, flags).search(string)
>>>>>>>>>>>>>>> File "C:\Python\Python3.6.8\lib\re.py", line 301:
>>>>>>>>>>>>>>> p = sre_compile.compile(pattern, flags)
>>>>>>>>>>>>>>> File "C:\Python\Python3.6.8\lib\sre_compile.py", line 562:
>>>>>>>>>>>>>>> p = sre_parse.parse(p, flags)
>>>>>>>>>>>>>>> File "C:\Python\Python3.6.8\lib\sre_parse.py", line 855:
>>>>>>>>>>>>>>> p = _parse_sub(source, pattern, flags & SRE_FLAG_VERBOSE, 0)
>>>>>>>>>>>>>>> File "C:\Python\Python3.6.8\lib\sre_parse.py", line 416:
>>>>>>>>>>>>>>> not nested and not items))
>>>>>>>>>>>>>>> File "C:\Python\Python3.6.8\lib\sre_parse.py", line 502:
>>>>>>>>>>>>>>> code = _escape(source, this, state)
>>>>>>>>>>>>>>> File "C:\Python\Python3.6.8\lib\sre_parse.py", line 401:
>>>>>>>>>>>>>>> raise source.error("bad escape %s" % escape, len(escape))
>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>> --
>>>>>>>>>>>>>>> Sent from:
>>>>>>>>>>>>>>> http://scons.1086193.n5.nabble.com/Users-f16930.html
>>>>>>>>>>>>>>> _______________________________________________
>>>>>>>>>>>>>>> Scons-users mailing list
>>>>>>>>>>>>>>> Scons-users at scons.org
>>>>>>>>>>>>>>> https://pairlist4.pair.net/mailman/listinfo/scons-users
>>>>>>>>>>>>>>>
>>>>>>>>>>>>>> _______________________________________________
>>>>>>>>>>>>>> Scons-users mailing list
>>>>>>>>>>>>>> Scons-users at scons.org
>>>>>>>>>>>>>> https://pairlist4.pair.net/mailman/listinfo/scons-users
>>>>>>>>>>>>>>
>>>>>>>>>>>>> _______________________________________________
>>>>>>>>>>>>> Scons-users mailing list
>>>>>>>>>>>>> Scons-users at scons.org
>>>>>>>>>>>>> https://pairlist4.pair.net/mailman/listinfo/scons-users
>>>>>>>>>>>>>
>>>>>>>>>>>> _______________________________________________
>>>>>>>>>>>> Scons-users mailing list
>>>>>>>>>>>> Scons-users at scons.org
>>>>>>>>>>>> https://pairlist4.pair.net/mailman/listinfo/scons-users
>>>>>>>>>>>>
>>>>>>>>>>> _______________________________________________
>>>>>>>>>> Scons-users mailing list
>>>>>>>>>> Scons-users at scons.org
>>>>>>>>>> https://pairlist4.pair.net/mailman/listinfo/scons-users
>>>>>>>>>>
>>>>>>>>> _______________________________________________
>>>>>>>>> Scons-users mailing list
>>>>>>>>> Scons-users at scons.org
>>>>>>>>> https://pairlist4.pair.net/mailman/listinfo/scons-users
>>>>>>>>>
>>>>>>>> _______________________________________________
>>>>>>>> Scons-users mailing list
>>>>>>>> Scons-users at scons.org
>>>>>>>> https://pairlist4.pair.net/mailman/listinfo/scons-users
>>>>>>>>
>>>>>>> _______________________________________________
>>>>>>> Scons-users mailing list
>>>>>>> Scons-users at scons.org
>>>>>>> https://pairlist4.pair.net/mailman/listinfo/scons-users
>>>>>>>
>>>>>> _______________________________________________
>>>>> Scons-users mailing list
>>>>> Scons-users at scons.org
>>>>> https://pairlist4.pair.net/mailman/listinfo/scons-users
>>>>>
>>>> _______________________________________________
>>>> Scons-users mailing list
>>>> Scons-users at scons.org
>>>> https://pairlist4.pair.net/mailman/listinfo/scons-users
>>>>
>>> _______________________________________________
>> Scons-users mailing list
>> Scons-users at scons.org
>> https://pairlist4.pair.net/mailman/listinfo/scons-users
>>
> _______________________________________________
> Scons-users mailing list
> Scons-users at scons.org
> https://pairlist4.pair.net/mailman/listinfo/scons-users
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://pairlist4.pair.net/pipermail/scons-users/attachments/20200723/4218f42f/attachment-0001.html>

More information about the Scons-users mailing list