[Scons-users] Error when passing from python 3.5.4 to python 3.6
Bill Deegan
bill at baddogconsulting.com
Thu Jul 23 17:25:17 EDT 2020
The link to the github repo in your email gives me page not found on github.
Typo?
You should be able to make this example
With a SConstruct and a tiny .ui file I'd think.
On Thu, Jul 23, 2020 at 1:06 PM Pierre-Luc Boily <pierreluc.boily at gmail.com>
wrote:
> I tried to make it as small as possible :
> https://github.com/peterphonic/scons_qt_example. It might not be as tiny
> as you asked, but I hope small enough.
>
> In this example, scons tries to compile uic_ASREngineWidget.cc, but this
> file is not generated because it is not part of the QT_UICCOM tool chain.
> SO, scons complain that the file doesn't exist (which is what I am trying
> to do!)
>
> At the end, what i'd like to to, is to generate the file
> ui_ASREngineWidget.h only. This is what we were doing with the qt4 and qt5
> tools...
>
> You will need a qt 5 folder. I shared mine with you from one drive :
> https://adacelcanada-my.sharepoint.com/:u:/g/personal/pboily_adacel_com/EQcBYZhknBhNqnhV3-dVNRABgF3S3JzjmOhAUEaKIqb3dQ?e=Cfigdy
>
> Le jeu. 23 juill. 2020, à 15 h 02, Pierre-Luc Boily <
> pierreluc.boily at gmail.com> a écrit :
>
>> Could you point me out the link please? On the issues page?
>> https://github.com/SCons/scons/issues ?
>>
>> Le jeu. 23 juill. 2020, à 14 h 30, Bill Deegan <bill at baddogconsulting.com>
>> a écrit :
>>
>>> Can you push up a TINY example to github so we can try running it?
>>>
>>> On Thu, Jul 23, 2020 at 11:18 AM Pierre-Luc Boily <
>>> pierreluc.boily at gmail.com> wrote:
>>>
>>>> I progressed a bit,
>>>>
>>>> If I do this :
>>>>
>>>> env['QT_UICCOM'] = [['$QT_UIC', '$QT_UICDECLFLAGS', '-o',
>>>> '${TARGETS[0]}', '$SOURCE']]
>>>>
>>>> It works a little bit better, the action is not truncated anymore.
>>>>
>>>> But somehow, somewhere, scons still have the original tool chain with 3
>>>> actions. See traces below :
>>>>
>>>> scons: Reading SConscript files ...
>>>> scons: done reading SConscript files.
>>>> scons: Building targets ...
>>>> Building build\sr\speech\ASREngineSpawner\ui_ASREngineWidget.h with
>>>> action:
>>>> UnlinkFunc(target, source, env)
>>>> Building build\sr\speech\ASREngineSpawner\ui_ASREngineWidget.h and
>>>> build\sr\speech\ASREngineSpawner\uic_ASREngineWidget.cc and
>>>> build\sr\speech\ASREngineSpawner\moc_ASREngineWidget.cc with action:
>>>> $QT_UIC $QT_UICDECLFLAGS -o ${TARGETS[0]} $SOURCE
>>>> C:\svn\3rdParty\3rdPartyPackages\Qt-5.12.1_vs2017\5.12.1\msvc2017\bin\uic
>>>> -o build\sr\speech\ASREngineSpawner\ui_ASREngineWidget.h
>>>> sr\speech\ASREngineSpawner\ASREngineWidget.ui
>>>> scons:
>>>> `build\sr\speech\ASREngineSpawner\MSVC14.1\x86\release\ASREngineSpawner.obj'
>>>> is up to date.
>>>> scons: done building targets.
>>>>
>>>> Even if ui_ASREngineWidget.h has been generated, the next build is not
>>>> up to date, because scons tries to generate uic_ASREngineWidget.cc, even
>>>> if the generation of this file has been removed from QT_UICCOM.
>>>>
>>>> Le jeu. 23 juill. 2020, à 08 h 52, Pierre-Luc Boily <
>>>> pierreluc.boily at gmail.com> a écrit :
>>>>
>>>>> scons: Reading SConscript files ...
>>>>> scons: done reading SConscript files.
>>>>> scons: Building targets ...
>>>>> Building build\sr\speech\ASREngineSpawner\ASREngineWidget.h and
>>>>> build\sr\speech\ASREngineSpawner\uic_ASREngineWidget.cc and
>>>>> build\sr\speech\ASREngineSpawner\moc_ASREngineWidget.cc with action:
>>>>> $QT_BINPATH\uic
>>>>>
>>>>> C:\svn\3rdParty\3rdPartyPackages\Qt-5.12.1_vs2017\5.12.1\msvc2017\bin\uic
>>>>>
>>>>> What I am trying to do (override QT_UICCOM ) by doing this :
>>>>>
>>>>> env['QT_UICCOM'] = env['QT_UICCOM'][0]
>>>>>
>>>>> is clearly not working
>>>>>
>>>>>
>>>>> Le mer. 22 juill. 2020, à 21 h 06, Bill Deegan <
>>>>> bill at baddogconsulting.com> a écrit :
>>>>>
>>>>>> run with --debug=presub and paste
>>>>>>
>>>>>> On Wed, Jul 22, 2020 at 9:48 AM Pierre-Luc Boily <
>>>>>> pierreluc.boily at gmail.com> wrote:
>>>>>>
>>>>>>> Not the first time and I guess not the last, but I think I don't see
>>>>>>> something that should be easy. From QT_UICCOM, I only need the first
>>>>>>> action. So, what I try to do is to override QT_UICCOM with QT_UICCOM[0],
>>>>>>> but this is not working, the uic action is truncated.
>>>>>>>
>>>>>>> If you look at the trace below, The result of the print of
>>>>>>> QT_UICCOM[0] is not the same as if I print the whole QT_UICCOM list. I
>>>>>>> mean, QT_UICCOM contains commas between arguments. QT_UICCOM[0]
>>>>>>> arguments are not separated by command. I am suspecting it could be my
>>>>>>> problem.
>>>>>>>
>>>>>>> Traces:
>>>>>>> -------------------------------
>>>>>>> scons: Reading SConscript files ...
>>>>>>>
>>>>>>> [['$QT_UIC', '$QT_UICDECLFLAGS', '-o', '${TARGETS[0]}', '$SOURCE'],
>>>>>>> ['$QT_UIC', '$QT_UICIMPLFLAGS', '-impl', '${TARGETS[0].file}', '-o',
>>>>>>> '${TARGETS[1]}', '$SOURCE'], ['$QT_MOC', '$QT_MOCFROMHFLAGS', '-o',
>>>>>>> '${TARGETS[2]}', '${TARGETS[0]}']]
>>>>>>>
>>>>>>> $QT_UIC $QT_UICDECLFLAGS -o ${TARGETS[0]} $SOURCE
>>>>>>>
>>>>>>> scons: done reading SConscript files.
>>>>>>> scons: Building targets ...
>>>>>>> C:\svn\3rdParty\3rdPartyPackages\Qt-5.12.1_vs2017\5.12.1\msvc2017\bin\uic
>>>>>>> UIC_ARG_IS_MISSING_HERE
>>>>>>> ---------------------------------
>>>>>>>
>>>>>>>
>>>>>>> Code :
>>>>>>>
>>>>>>> print('')
>>>>>>> print(env['QT_UICCOM'])
>>>>>>> print('')
>>>>>>> print(env['QT_UICCOM'][0])
>>>>>>> print('')
>>>>>>>
>>>>>>> env['QT_UICCOM'] = env['QT_UICCOM'][0]
>>>>>>>
>>>>>>> lib_tgt = env.Library(target='lib',
>>>>>>> source=['ASREngineSpawner.cpp', 'ProcessManager.cpp', 'ASREngineWidget.ui'])
>>>>>>>
>>>>>>>
>>>>>>> Le mar. 21 juill. 2020, à 19 h 34, Bill Deegan <
>>>>>>> bill at baddogconsulting.com> a écrit :
>>>>>>>
>>>>>>>> Yes.
>>>>>>>> Change it in your Environment() in your SConstruct/SConscripts..
>>>>>>>>
>>>>>>>> On Tue, Jul 21, 2020 at 1:16 PM Pierre-Luc Boily <
>>>>>>>> pierreluc.boily at gmail.com> wrote:
>>>>>>>>
>>>>>>>>> The problem is still there with scons 4.0.1, but I decided to use
>>>>>>>>> qt tool that ships with scons. I was not even aware of this, we were using
>>>>>>>>> the external tool since forever....
>>>>>>>>>
>>>>>>>>> But I still do have a weird problem. It looks like scons Uic does
>>>>>>>>> something that I don't need, the -impl option. It looks like it is not
>>>>>>>>> part of the Uic application that ships with my version of qt. Is there a
>>>>>>>>> way to remove the --impl from 'QT_UICCOM': ?
>>>>>>>>>
>>>>>>>>> scons: done reading SConscript files.
>>>>>>>>> scons: Building targets ...
>>>>>>>>> C:\svn\3rdParty\3rdPartyPackages\Qt-5.12.1_vs2017\5.12.1\msvc2017\bin\uic
>>>>>>>>> -o build\sr\speech\ASREngineSpawner\ASREngineWidget.h
>>>>>>>>> sr\speech\ASREngineSpawner\ASREngineWidget.ui
>>>>>>>>> C:\svn\3rdParty\3rdPartyPackages\Qt-5.12.1_vs2017\5.12.1\msvc2017\bin\uic
>>>>>>>>> -impl ASREngineWidget.h -o
>>>>>>>>> build\sr\speech\ASREngineSpawner\uic_ASREngineWidget.cc
>>>>>>>>> sr\speech\ASREngineSpawner\ASREngineWidget.ui
>>>>>>>>> Unknown option 'impl'.
>>>>>>>>> scons: *** [build\sr\speech\ASREngineSpawner\ASREngineWidget.h]
>>>>>>>>> Error 1
>>>>>>>>> scons: building terminated because of errors.
>>>>>>>>> PS C:\SVN\products\faa_mx\integ-newScons.4.0>
>>>>>>>>> PS C:\SVN\products\faa_mx\integ-newScons.4.0>
>>>>>>>>> PS C:\SVN\products\faa_mx\integ-newScons.4.0>
>>>>>>>>> PS C:\SVN\products\faa_mx\integ-newScons.4.0>
>>>>>>>>> PS C:\SVN\products\faa_mx\integ-newScons.4.0>
>>>>>>>>> PS C:\SVN\products\faa_mx\integ-newScons.4.0>
>>>>>>>>> C:\svn\3rdParty\3rdPartyPackages\Qt-5.12.1_vs2017\5.12.1\msvc2017\bin\uic
>>>>>>>>> -help
>>>>>>>>> Usage:
>>>>>>>>> C:\svn\3rdParty\3rdPartyPackages\Qt-5.12.1_vs2017\5.12.1\msvc2017\bin\uic.exe
>>>>>>>>> [options] [uifile]
>>>>>>>>> Qt User Interface Compiler version 5.12.1
>>>>>>>>>
>>>>>>>>> Options:
>>>>>>>>> -?, -h, --help Displays this help.
>>>>>>>>> -v, --version Displays version information.
>>>>>>>>> -d, --dependencies Display the dependencies.
>>>>>>>>> -o, --output <file> Place the output into <file>
>>>>>>>>> -p, --no-protection Disable header protection.
>>>>>>>>> -n, --no-implicit-includes Disable generation of
>>>>>>>>> #include-directives.
>>>>>>>>> -s, --no-stringliteral Deprecated. The use of this option
>>>>>>>>> won't take
>>>>>>>>> any effect.
>>>>>>>>> --postfix <postfix> Postfix to add to all generated
>>>>>>>>> classnames.
>>>>>>>>> --tr, --translate <function> Use <function> for i18n.
>>>>>>>>> --include <include-file> Add #include <include-file> to
>>>>>>>>> <file>.
>>>>>>>>> -g, --generator <java|cpp> Select generator.
>>>>>>>>> --idbased Use id based function for i18n
>>>>>>>>>
>>>>>>>>> Le lun. 20 juill. 2020, à 23 h 45, Pierre-Luc Boily <
>>>>>>>>> pierreluc.boily at gmail.com> a écrit :
>>>>>>>>>
>>>>>>>>>> Thx. Ill try with scons 4 and with the qt tool that ships with
>>>>>>>>>> scons. Let you know...
>>>>>>>>>>
>>>>>>>>>> Le lun. 20 juill. 2020, à 08 h 37, Thomas Berg <
>>>>>>>>>> merlin66b at gmail.com> a écrit :
>>>>>>>>>>
>>>>>>>>>>>
>>>>>>>>>>> On Sat, 18 Jul 2020 at 00:35, Pierre-Luc Boily <
>>>>>>>>>>> pierreluc.boily at gmail.com> wrote:
>>>>>>>>>>>
>>>>>>>>>>>> I was pretty sure the problem was in qt5 tool and not in scons ?
>>>>>>>>>>>>
>>>>>>>>>>>>
>>>>>>>>>>> That could very well be, but volunteers who devote their spare
>>>>>>>>>>> time to help may have a policy to only start helping you when you have
>>>>>>>>>>> upgraded to the latest version. In general it avoids wasting time on
>>>>>>>>>>> already solved issues.
>>>>>>>>>>>
>>>>>>>>>>> It could be that upgrading doesn't help, but things may also
>>>>>>>>>>> have happened in SCons that could affect this. If you still see the problem
>>>>>>>>>>> after upgrading you'll likely get the help you need.
>>>>>>>>>>>
>>>>>>>>>>>
>>>>>>>>>>>
>>>>>>>>>>>> File
>>>>>>>>>>>> "C:\SVN\3rdParty\devTool\site_scons\site_tools\qt5_init.py", line 373:
>>>>>>>>>>>> cpp, cpp_contents, out_sources)
>>>>>>>>>>>> File
>>>>>>>>>>>> "C:\SVN\3rdParty\devTool\site_scons\site_tools\qt5_init.py", line 229:
>>>>>>>>>>>> if cpp and re.search(inc_moc_cpp, cpp_contents, re.M):
>>>>>>>>>>>> File "C:\Python\Python3.6.8\lib\re.py", line 182:
>>>>>>>>>>>>
>>>>>>>>>>>>
>>>>>>>>>>> Regarding the error, it's similar to an issue I saw myself when
>>>>>>>>>>> switching to python 3. SCons has two ways to get the content of a file, one
>>>>>>>>>>> returns text (python unicode), and the other returns bytes. If that's the
>>>>>>>>>>> problem, swapping out calls to get_contents() with get_text_contents()
>>>>>>>>>>> might help in the tool source code.
>>>>>>>>>>>
>>>>>>>>>>> I see you are using an external qt tool instead of the one that
>>>>>>>>>>> ships with scons. I think the qt tool that ships with scons supports Qt5
>>>>>>>>>>> now, so you could consider trying it instead of this possibly unmaintained
>>>>>>>>>>> tool.
>>>>>>>>>>>
>>>>>>>>>>> Cheers,
>>>>>>>>>>> Thomas
>>>>>>>>>>>
>>>>>>>>>>>
>>>>>>>>>>> On Sat, 18 Jul 2020 at 00:35, Pierre-Luc Boily <
>>>>>>>>>>> pierreluc.boily at gmail.com> wrote:
>>>>>>>>>>>
>>>>>>>>>>>> I was pretty sure the problem was in qt5 tool and not in scons ?
>>>>>>>>>>>>
>>>>>>>>>>>> File
>>>>>>>>>>>> "C:\SVN\3rdParty\devTool\site_scons\site_tools\qt5_init.py", line 373:
>>>>>>>>>>>> cpp, cpp_contents, out_sources)
>>>>>>>>>>>> File
>>>>>>>>>>>> "C:\SVN\3rdParty\devTool\site_scons\site_tools\qt5_init.py", line 229:
>>>>>>>>>>>> if cpp and re.search(inc_moc_cpp, cpp_contents, re.M):
>>>>>>>>>>>> File "C:\Python\Python3.6.8\lib\re.py", line 182:
>>>>>>>>>>>>
>>>>>>>>>>>> Le ven. 17 juill. 2020, à 15 h 48, Bill Deegan <
>>>>>>>>>>>> bill at baddogconsulting.com> a écrit :
>>>>>>>>>>>>
>>>>>>>>>>>>> Please update your SCons version to 4.0.1 and retry.
>>>>>>>>>>>>> Note if you've installed scons via pip, you should pip
>>>>>>>>>>>>> uninstall scons, and then pip install scons as there's a windows specific
>>>>>>>>>>>>> pip+scons issue.
>>>>>>>>>>>>>
>>>>>>>>>>>>> On Fri, Jul 17, 2020 at 9:09 AM Pierre-Luc Boily <
>>>>>>>>>>>>> pierreluc.boily at gmail.com> wrote:
>>>>>>>>>>>>>
>>>>>>>>>>>>>> Hello,
>>>>>>>>>>>>>>
>>>>>>>>>>>>>> Sorry to post this here, this is not direclty linked to
>>>>>>>>>>>>>> scons, but to qt5
>>>>>>>>>>>>>> tools. I thought that maybe someone faced this problem
>>>>>>>>>>>>>> before in the scons
>>>>>>>>>>>>>> code.
>>>>>>>>>>>>>>
>>>>>>>>>>>>>>
>>>>>>>>>>>>>> https://bitbucket.org/dirkbaechle/scons_qt5/issues/14/from-python-354-to-368-raise-sourceerror
>>>>>>>>>>>>>>
>>>>>>>>>>>>>> python : 3.6.8
>>>>>>>>>>>>>> scons : 3.0.5
>>>>>>>>>>>>>> os : windows 10
>>>>>>>>>>>>>>
>>>>>>>>>>>>>> Trying to update my python from 3.5.4 to 3.6.8 version and I
>>>>>>>>>>>>>> stumbled on the
>>>>>>>>>>>>>> exception below. I found something similar to this page :
>>>>>>>>>>>>>>
>>>>>>>>>>>>>> https://stackoverflow.com/questions/58328587/python-3-7-4-re-error-bad-escape-s-at-position-0
>>>>>>>>>>>>>> .
>>>>>>>>>>>>>> but I don`t understand... :
>>>>>>>>>>>>>>
>>>>>>>>>>>>>> PS C:\SVN\products\faa_mx\integ> scons -n
>>>>>>>>>>>>>> scons: Reading SConscript files ...
>>>>>>>>>>>>>> error: bad escape \m at position 37:
>>>>>>>>>>>>>> File "C:\SVN\products\faa_mx\integ\SConstruct", line 30:
>>>>>>>>>>>>>> sc_manager.build()
>>>>>>>>>>>>>> File
>>>>>>>>>>>>>>
>>>>>>>>>>>>>> "C:\SVN\products\faa_mx\integ\cm\env\scons\utilities\sconscriptManager.py",
>>>>>>>>>>>>>> line 44:
>>>>>>>>>>>>>> duplicate=0)
>>>>>>>>>>>>>> File
>>>>>>>>>>>>>>
>>>>>>>>>>>>>> "c:\python\python3.6.8\lib\site-packages\scons\SCons\Script\SConscript.py",
>>>>>>>>>>>>>> line 668:
>>>>>>>>>>>>>> return method(*args, **kw)
>>>>>>>>>>>>>> File
>>>>>>>>>>>>>>
>>>>>>>>>>>>>> "c:\python\python3.6.8\lib\site-packages\scons\SCons\Script\SConscript.py",
>>>>>>>>>>>>>> line 605:
>>>>>>>>>>>>>> return _SConscript(self.fs, files, **subst_kw)
>>>>>>>>>>>>>> File
>>>>>>>>>>>>>>
>>>>>>>>>>>>>> "c:\python\python3.6.8\lib\site-packages\scons\SCons\Script\SConscript.py",
>>>>>>>>>>>>>> line 286:
>>>>>>>>>>>>>> exec(compile(scriptdata, scriptname, 'exec'),
>>>>>>>>>>>>>> call_stack[-1].globals)
>>>>>>>>>>>>>> File
>>>>>>>>>>>>>>
>>>>>>>>>>>>>> "C:\SVN\products\faa_mx\integ\sr\speech\ASREngineSpawner\ASREngineSpawner.sc",
>>>>>>>>>>>>>> line 12:
>>>>>>>>>>>>>> lib_tgt = env.build_library(envService,
>>>>>>>>>>>>>> ['ASREngineSpawner.cpp',
>>>>>>>>>>>>>> 'ProcessManager.cpp'] + env.Glob('.ui'))
>>>>>>>>>>>>>> File
>>>>>>>>>>>>>>
>>>>>>>>>>>>>> "C:\SVN\products\faa_mx\integ\cm\env\scons\adacelBuilders\pseudoBuilders.py",
>>>>>>>>>>>>>> line 95:
>>>>>>>>>>>>>> source=tgt)
>>>>>>>>>>>>>> File
>>>>>>>>>>>>>> "c:\python\python3.6.8\lib\site-packages\scons\SCons\Environment.py",
>>>>>>>>>>>>>> line 260:
>>>>>>>>>>>>>> return MethodWrapper.call(self, target, source, *args, **kw)
>>>>>>>>>>>>>> File
>>>>>>>>>>>>>> "c:\python\python3.6.8\lib\site-packages\scons\SCons\Environment.py",
>>>>>>>>>>>>>> line 224:
>>>>>>>>>>>>>> return self.method(*nargs, **kwargs)
>>>>>>>>>>>>>> File
>>>>>>>>>>>>>> "c:\python\python3.6.8\lib\site-packages\scons\SCons\Builder.py", line
>>>>>>>>>>>>>> 645:
>>>>>>>>>>>>>> return self.execute(env, target, source, OverrideWarner(kw),
>>>>>>>>>>>>>> ekw)
>>>>>>>>>>>>>> File
>>>>>>>>>>>>>> "c:\python\python3.6.8\lib\site-packages\scons\SCons\Builder.py", line
>>>>>>>>>>>>>> 564:
>>>>>>>>>>>>>> tlist, slist = self.create_nodes(env, target, source)
>>>>>>>>>>>>>> File
>>>>>>>>>>>>>> "c:\python\python3.6.8\lib\site-packages\scons\SCons\Builder.py", line
>>>>>>>>>>>>>> 528:
>>>>>>>>>>>>>> target, source = self.emitter(target=tlist, source=slist,
>>>>>>>>>>>>>> env=env)
>>>>>>>>>>>>>> File
>>>>>>>>>>>>>> "c:\python\python3.6.8\lib\site-packages\scons\SCons\Builder.py", line
>>>>>>>>>>>>>> 353:
>>>>>>>>>>>>>> target, source = e(target, source, env)
>>>>>>>>>>>>>> File
>>>>>>>>>>>>>> "C:\SVN\3rdParty\devTool\site_scons\site_tools\qt5_init.py", line 373:
>>>>>>>>>>>>>> cpp, cpp_contents, out_sources)
>>>>>>>>>>>>>> File
>>>>>>>>>>>>>> "C:\SVN\3rdParty\devTool\site_scons\site_tools\qt5_init.py", line 229:
>>>>>>>>>>>>>> if cpp and re.search(inc_moc_cpp, cpp_contents, re.M):
>>>>>>>>>>>>>> File "C:\Python\Python3.6.8\lib\re.py", line 182:
>>>>>>>>>>>>>> return _compile(pattern, flags).search(string)
>>>>>>>>>>>>>> File "C:\Python\Python3.6.8\lib\re.py", line 301:
>>>>>>>>>>>>>> p = sre_compile.compile(pattern, flags)
>>>>>>>>>>>>>> File "C:\Python\Python3.6.8\lib\sre_compile.py", line 562:
>>>>>>>>>>>>>> p = sre_parse.parse(p, flags)
>>>>>>>>>>>>>> File "C:\Python\Python3.6.8\lib\sre_parse.py", line 855:
>>>>>>>>>>>>>> p = _parse_sub(source, pattern, flags & SRE_FLAG_VERBOSE, 0)
>>>>>>>>>>>>>> File "C:\Python\Python3.6.8\lib\sre_parse.py", line 416:
>>>>>>>>>>>>>> not nested and not items))
>>>>>>>>>>>>>> File "C:\Python\Python3.6.8\lib\sre_parse.py", line 502:
>>>>>>>>>>>>>> code = _escape(source, this, state)
>>>>>>>>>>>>>> File "C:\Python\Python3.6.8\lib\sre_parse.py", line 401:
>>>>>>>>>>>>>> raise source.error("bad escape %s" % escape, len(escape))
>>>>>>>>>>>>>>
>>>>>>>>>>>>>>
>>>>>>>>>>>>>>
>>>>>>>>>>>>>>
>>>>>>>>>>>>>> --
>>>>>>>>>>>>>> Sent from:
>>>>>>>>>>>>>> http://scons.1086193.n5.nabble.com/Users-f16930.html
>>>>>>>>>>>>>> _______________________________________________
>>>>>>>>>>>>>> Scons-users mailing list
>>>>>>>>>>>>>> Scons-users at scons.org
>>>>>>>>>>>>>> https://pairlist4.pair.net/mailman/listinfo/scons-users
>>>>>>>>>>>>>>
>>>>>>>>>>>>> _______________________________________________
>>>>>>>>>>>>> Scons-users mailing list
>>>>>>>>>>>>> Scons-users at scons.org
>>>>>>>>>>>>> https://pairlist4.pair.net/mailman/listinfo/scons-users
>>>>>>>>>>>>>
>>>>>>>>>>>> _______________________________________________
>>>>>>>>>>>> Scons-users mailing list
>>>>>>>>>>>> Scons-users at scons.org
>>>>>>>>>>>> https://pairlist4.pair.net/mailman/listinfo/scons-users
>>>>>>>>>>>>
>>>>>>>>>>> _______________________________________________
>>>>>>>>>>> Scons-users mailing list
>>>>>>>>>>> Scons-users at scons.org
>>>>>>>>>>> https://pairlist4.pair.net/mailman/listinfo/scons-users
>>>>>>>>>>>
>>>>>>>>>> _______________________________________________
>>>>>>>>> Scons-users mailing list
>>>>>>>>> Scons-users at scons.org
>>>>>>>>> https://pairlist4.pair.net/mailman/listinfo/scons-users
>>>>>>>>>
>>>>>>>> _______________________________________________
>>>>>>>> Scons-users mailing list
>>>>>>>> Scons-users at scons.org
>>>>>>>> https://pairlist4.pair.net/mailman/listinfo/scons-users
>>>>>>>>
>>>>>>> _______________________________________________
>>>>>>> Scons-users mailing list
>>>>>>> Scons-users at scons.org
>>>>>>> https://pairlist4.pair.net/mailman/listinfo/scons-users
>>>>>>>
>>>>>> _______________________________________________
>>>>>> Scons-users mailing list
>>>>>> Scons-users at scons.org
>>>>>> https://pairlist4.pair.net/mailman/listinfo/scons-users
>>>>>>
>>>>> _______________________________________________
>>>> Scons-users mailing list
>>>> Scons-users at scons.org
>>>> https://pairlist4.pair.net/mailman/listinfo/scons-users
>>>>
>>> _______________________________________________
>>> Scons-users mailing list
>>> Scons-users at scons.org
>>> https://pairlist4.pair.net/mailman/listinfo/scons-users
>>>
>> _______________________________________________
> Scons-users mailing list
> Scons-users at scons.org
> https://pairlist4.pair.net/mailman/listinfo/scons-users
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://pairlist4.pair.net/pipermail/scons-users/attachments/20200723/4af3f769/attachment-0001.html>
More information about the Scons-users
mailing list