[Scons-users] VB: SCons fails to build

[Bill Deegan]

You have
import project
in your top level SConstruct.

That's not a scons or python module.
You either have it in your site_scons, or in your python tree.
Thus we cannot use your example.

-Bill

On Fri, Oct 12, 2018 at 2:55 AM Kristian Kinderlöv <
Kristian.Kinderlov at husqvarnagroup.com> wrote:

> Strange that it doesn’t work. I’ve double check and for me it run outside
> my build tree. There are some prerequisites: gcc, scons, python, linux. Did
> you get any debug/error logs? As I mentioned before I haven’t managed to
> get the problem with a simple example, but I can give that one more try.
>
>
>
> In my Ubuntu environment I get:
>
> ./build/scons_wrapper.sh CONFIG=config/config-posix-debug.cfg
> TOOLCHAIN=posix-gcc hello
>
> NOTE: Compiling with gcc 7 found in /usr/bin
>
> gcc
> _output/hello/host/config-posix-debug/posix-gcc/applications/hello/hello_main.o
>
> scons: ***
> [_output/hello/host/config-posix-debug/posix-gcc/applications/hello/hello_main.o]
> No such file or directory
>
>
>
> And in Arch Linux or MSYS:
>
> ./build/scons_wrapper.sh CONFIG=config/config-posix-debug.cfg
> TOOLCHAIN=posix-gcc hello NOTE: Compiling with gcc 7.2.1 found in /usr/bin
>
> gcc
> _output/hello/host/config-posix-debug/posix-gcc/applications/hello/hello_main.o
>
> gcc
> _output/hello/host/config-posix-debug/posix-gcc/applications/hello/hello
>
> size
> _output/hello/host/config-posix-debug/posix-gcc/applications/hello/hello >
> _output/hello/host/config-posix-debug/posix-gcc/applications/hello/hello.size
>
> objdump -d
> _output/hello/host/config-posix-debug/posix-gcc/applications/hello/hello >
> _output/hello/host/config-posix-debug/posix-gcc/applications/hello/hello.lst
>
> Install file:
> "_output/hello/host/config-posix-debug/posix-gcc/applications/hello/hello.size"
> as "_output/hello/host/config-posix-debug/posix-gcc/hello.size"
>
> Install file:
> "_output/hello/host/config-posix-debug/posix-gcc/applications/hello/hello.lst"
> as "_output/hello/host/config-posix-debug/posix-gcc/hello.lst"
>
> Install file:
> "_output/hello/host/config-posix-debug/posix-gcc/applications/hello/hello"
> as "_output/hello/host/config-posix-debug/posix-gcc/bin/hello"
>
>
>
>
>
> *Från:* Bill Deegan <bill at baddogconsulting.com>
> *Skickat:* den 11 oktober 2018 18:47
> *Till:* SCons users mailing list <scons-users at scons.org>
> *Kopia:* Kristian Kinderlöv <Kristian.Kinderlov at husqvarnagroup.com>
> *Ämne:* Re: [Scons-users] VB: SCons fails to build
>
>
>
> Doesn't work.
>
> Trying to import project.
>
>
>
> Please make a single file to demonstrate the issue. And double check it
> can be run outside your build tree.
>
>
>
>
>
> On Thu, Oct 11, 2018 at 9:21 AM Kristian Kinderlöv via Scons-users <
> scons-users at scons.org> wrote:
>
> Hi again,
>
>
>
> I’ve removed the git repo check in the attached file, so hopefully it works now for you. I agree that a more simple example would be better and I’ve tried that but without getting the error/problem. Maybe the “spawn” wasn’t called in that example.
>
>
>
> *Från:* Scons-users <scons-users-bounces at scons.org> *För *Bill Deegan
> *Skickat:* den 10 oktober 2018 18:43
> *Till:* SCons users mailing list <scons-users at scons.org>
> *Ämne:* Re: [Scons-users] VB: SCons fails to build
>
>
>
> Ideally you'd send a single SConstruct file to demonstrate, rather than
> tyring to extract some subset of your non-trivial build system.
>
>
>
> On Wed, Oct 10, 2018 at 9:51 AM Mats Wichmann <mats at wichmann.us> wrote:
>
> On 10/10/2018 05:41 AM, Kristian Kinderlöv via Scons-users wrote:
> > Hi,
> >
> > I've attached an example. Extract the file with "tar -zxvf
> my_project.tar.gz" and  "cd" to my_project.
> >
> > Now you build with:
> > ./build/scons_wrapper.sh CONFIG=config/config-posix-debug.cfg
> TOOLCHAIN=posix-gcc hello
>
>
> Funkar inte :)
>
> it seems to expect more setup than you sent along as it gets git errors
>
> fatal: Not a git repository (or any parent up to mount point /)
> Stopping at filesystem boundary (GIT_DISCOVERY_ACROSS_FILESYSTEM not set).
>
>
> > Answer from the question below:
> > Default in ubuntu the "sh" points to dash:
> > ll /bin/sh
> > lrwxrwxrwx 1 root root 9 Oct  3 09:49 /bin/sh -> /bin/dash*
> >
> > (I tried also to changed "sh" to point to bash instead but that gave the
> same problem)
> >
> > Br
> > Kristian
>
> I didn't mean the system's idea of 'sh' (I know Ubuntu makes that dash),
> but scons' idea of the construction variable SHELL.  However, I can grep
> through what you sent and see nothing touches that.
>
>
>
> _______________________________________________
> Scons-users mailing list
> Scons-users at scons.org
> https://pairlist4.pair.net/mailman/listinfo/scons-users
>
>
> The information in this email may be confidential and/or legally
> privileged. It has been sent for the sole use of the intended recipient(s).
> If you are not an intended recipient, you are strictly prohibited from
> reading, disclosing, distributing, copying or using this email or any of
> its contents, in any way whatsoever. If you have received this email in
> error, please contact the sender by reply email and destroy all copies of
> the original message. Please also be advised that emails are not a secure
> form for communication, and may contain errors.
>
> _______________________________________________
> Scons-users mailing list
> Scons-users at scons.org
> https://pairlist4.pair.net/mailman/listinfo/scons-users
>
>
> The information in this email may be confidential and/or legally
> privileged. It has been sent for the sole use of the intended recipient(s).
> If you are not an intended recipient, you are strictly prohibited from
> reading, disclosing, distributing, copying or using this email or any of
> its contents, in any way whatsoever. If you have received this email in
> error, please contact the sender by reply email and destroy all copies of
> the original message. Please also be advised that emails are not a secure
> form for communication, and may contain errors.
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://pairlist4.pair.net/pipermail/scons-users/attachments/20181012/c2850012/attachment-0001.html>